Silver(I) complexes with voriconazole as promising anti-Candida agents.

Recognizing that metal ions play an important role in modifying the pharmacological properties of known organic-based drugs, the present manuscript addresses the complexation of the antifungal agent voriconazole (vcz) with the biologically relevant silver(I) ion as a strategy for the development of new antimycotics. The synthesized silver(I) complexes with vcz were characterized by mass spectrometry, IR, UV-Vis and NMR spectroscopy and single-crystal X-ray diffraction analysis. The crystallographic results showed that complexes {[Ag(vcz)(H2O)]CH3SO3}n (1), {[Ag(vcz)2]BF4}n (2) and {[Ag(vcz)2]PF6}n (3) have polymeric structures in the solid state, in which silver(I) ions have a distorted tetrahedral geometry. On the other hand, DFT calculations revealed that the investigated silver(I) complexes 1-3 in DMSO exist as linear [Ag(vcz-N2)(vcz-N19)]+ (1a), [Ag(vcz-N2)(vcz-N4)]+ (2a) and [Ag(vcz-N4)2]+ (3a) species, respectively. The evaluated complexes showed an enhanced anti-Candida activity compared to the parent drug with minimal inhibitory concentration (MIC) values in the range of 0.02-1.05 µM. In comparison with vcz, the corresponding silver(I) complexes showed better activity in prevention hyphae and biofilm formation of C. albicans, indicating that they could be considered as promising agents against Candida that significantly inhibit its virulence. Also, these complexes are much better inhibitors of ergosterol synthesis in the cell membrane of C. albicans at the concentration of 0.5 × MIC. This is also confirmed by a molecular docking, which revealed that complexes 1a - 3a showed better inhibitory activity than vcz against the sterol 14α-demethylase enzyme cytochrome P450 (CYP51B), which plays a crucial role in the formation of ergosterol.

A Phase 1 Trial to Evaluate the Relationship Between Fluoride Intake and Urinary Fluoride Excretion in Healthy Participants.

Chronic overexposure to fluoride can have deleterious effects in the musculoskeletal system. Some fluorine-containing therapeutics, such as voriconazole, release fluoride through metabolism. Therefore, drug-related fluoride exposure should be assessed for novel therapeutics suspected of releasing fluoride through metabolism. Two trials were conducted to identify the optimal method of assessing drug-related fluoride exposure. In trial 1, designed to assess reproducibility of fluoride pharmacokinetics in urine and plasma, 14 participants were administered a fluoride-restricted diet and once-daily doses of sodium fluoride (2.2 mg [1 mg of fluoride] on days 1 and 2; and 13.2 mg of sodium fluoride [6 mg of fluoride] on days 3 and 4). In trial 2, designed to confirm the selected method for fluoride detection, 12 participants were administered a fluoride-restricted diet and randomized to receive voriconazole (400 mg twice, 12 hours apart, on day 1 [131 mg/d of fluoride maximum], then 3 doses of 200 mg every 12 hours [65.3 mg/d of fluoride maximum]) or placebo. Plasma fluoride concentrations and urinary fluoride excretion were assessed in each trial. Assessment of plasma fluoride concentrations in trial 1 was limited by 301 of 854 samples (35.2%) below the lower limit of quantitation. Urine fluoride excretion was readily measured and demonstrated a decrease from baseline during the fluoride-restricted diet phase, as well as dose-proportional increases with fluoride administration. In trial 2, increases in urine fluoride were successfully observed in participants administered voriconazole. In conclusion, fluoride exposure was optimally assessed by urinary fluoride excretion in conjunction with strict dietary fluoride restrictions, as measurements were consistent and reproducible.

The Pharmacokinetic Effect of Itraconazole and Voriconazole on Ripretinib in Beagle Dogs by UPLC-MS/MS Technique.

BACKGROUND: A new UPLC-MS/MS technique for the determination of ripretinib in beagle dog plasma was developed, and the pharmacokinetic effects of voriconazole and itraconazole on ripretinib in beagle dogs were studied. METHODS: After extraction with ethyl acetate under alkaline conditions, ripretinib was detected using avapritinib as the internal standard (IS). The mobile phases were 0.1% formic acid-acetonitrile. The scanning method was multi-reaction monitoring using ESI+ source, and the ion pairs for ripretinib and IS were m/z 509.93→416.85 and 499.1→482.09, respectively. This animal experiment adopted a three period self-control experimental design. In the first period, ripretinib was orally administered to six beagle dogs at a dose of 5 mg/kg. In the second period, the same six beagle dogs were orally given itraconazole at a dose of 7 mg/kg, after 30 min, ripretinib was orally given. In the third period, voriconazole at a dose of 7 mg/kg was given orally, and then ripretinib was orally given. At different time points, the blood samples were collected. The concentration of ripretinib was detected, and the pharmacokinetic parameters of ripretinib were calculated. RESULTS: Ripretinib had a good linear relationship in the range of 1-1000 ng/mL. The precision, accuracy, recovery, matrix effect and stability met the requirements of the guiding principles. After erdafitinib combined with itraconazole, the Cmax and AUC0→t of ripretinib increased by 38.35% and 36.36%, respectively, and the t1/2 was prolonged to 7.53 h. After ripretinib combined with voriconazole, the Cmax and AUC0→t of ripretinib increased by 37.44% and 25.52%, respectively, and the t1/2 was prolonged to 7.33 h. CONCLUSION: A new and reliable UPLC-MS/MS technique was fully optimized and developed to detect the concentration of ripretinib in beagle dog plasma. Itraconazole and voriconazole could inhibit the metabolism of ripretinib in beagle dogs and increase the plasma exposure of ripretinib.

Hybrid natural hydrogels integrated with voriconazole-loaded microspheres for ocular antifungal applications.

Fungal keratitis is a major threat to ocular morbidity and blindness. The therapeutic efficacy of eye drops against fungal keratitis is limited by their poor bioavailability, especially in patients with corneal stromal ulcers that lead to tissue defects. Therefore, intervention measures that can control fungal infection while promoting tissue regeneration are desirable. Herein, we designed and fabricated natural antifungal hydrogels that comprise a decellularized porcine cornea (DPC), gelatin and microspheres (MCs) containing voriconazole (Vor) for the management of fungal keratitis with focal corneal stromal defects. The size and structure of the Vor-loaded MCs were characterized by scanning electron microscopy (SEM), Fourier-transform infrared (FTIR) spectroscopy and differential scanning calorimetry (DSC). The antifungal drug Vor showed that continuous release from the hybrid hydrogel system for up to 7 days and that MCs loading did not affect the mechanical properties, in vitro release profile or cytocompatibility of the hybrid hydrogel. Moreover, the Vor-loaded hydrogels exhibited excellent antifungal properties against F. solani and A. fumigatus. The efficiency of the natural antifungal hydrogel was evaluated by an ex vivo infectious rabbit corneal defect model. After 24 h, the number of fungal colony-forming units (CFU) significantly decreased in antifungal hydrogel-treated corneal tissue compared with that in non-treated corneas and corneas treated with hydrogels without Vor. The above results demonstrated that this natural hydrogel-based drug delivery system holds great promise for preventing fungal keratitis infection while promoting focal corneal stromal regeneration. Additionally, natural hybrid hydrogels might be a candidate material for use with various drugs in the effective treatment of many other ocular diseases.

Nebulised surface-active hybrid nanoparticles of voriconazole for pulmonary Aspergillosis demonstrate clathrin-mediated cellular uptake, improved antifungal efficacy and lung retention.

BACKGROUND: Incidence of pulmonary aspergillosis is rising worldwide, owing to an increased population of immunocompromised patients. Notable potential of the pulmonary route has been witnessed in antifungal delivery due to distinct advantages of direct lung targeting and first-pass evasion. The current research reports biomimetic surface-active lipid-polymer hybrid (LPH) nanoparticles (NPs) of voriconazole, employing lung-specific lipid, i.e., dipalmitoylphosphatidylcholine and natural biodegradable polymer, i.e., chitosan, to augment its pulmonary deposition and retention, following nebulization. RESULTS: The developed nanosystem exhibited a particle size in the range of 228-255 nm and drug entrapment of 45-54.8%. Nebulized microdroplet characterization of NPs dispersion revealed a mean diameter of ≤ 5 µm, corroborating its deep lung deposition potential as determined by next-generation impactor studies. Biophysical interaction of LPH NPs with lipid-monolayers indicated their surface-active potential and ease of intercalation into the pulmonary surfactant membrane at the air-lung interface. Cellular viability and uptake studies demonstrated their cytocompatibility and time-and concentration-dependent uptake in lung-epithelial A549 and Calu-3 cells with clathrin-mediated internalization. Transepithelial electrical resistance experiments established their ability to penetrate tight airway Calu-3 monolayers. Antifungal studies on laboratory strains and clinical isolates depicted their superior efficacy against Aspergillus species. Pharmacokinetic studies revealed nearly 5-, 4- and threefolds enhancement in lung AUC, Tmax, and MRT values, construing significant drug access and retention in lungs. CONCLUSIONS: Nebulized LPH NPs were observed as a promising solution to provide effective and safe therapy for the management of pulmonary aspergillosis infection with improved patient compliance and avoidance of systemic side-effects.

Voriconazole-natural latex dressings for treating infected Candida spp. skin ulcers.

Aim: This work aimed to develop a membrane based on voriconazole (VCZ)-loaded natural rubber latex (NRL) for treating infected ulcers with Candida spp. and study their interaction, drug release, antifungal activity against Candida parapsilosis and biological characterization. Materials & methods: VCZ-loaded NRL membrane was produced by casting method. Results: Infrared spectrum showed that the incorporation of VCZ into the NRL membrane maintained its characteristics. Its mechanical properties were considered suitable for dermal application. The VCZ was able to release from NRL membrane, maintaining its antifungal activity against C. parapsilosis, besides did not present hemolytic effects. Conclusion: The VCZ-NRL membrane showed good results in mechanical, antifungal and biological assays, representing an interesting alternative to treatment of infected wound with Candida spp.

Ocular Inserts of Voriconazole-Loaded Proniosomal Gels: Formulation, Evaluation and Microbiological Studies.

BACKGROUND: Voriconazole (VRC) is a triazole broad spectrum antifungal drug, used in the management of versatile fungal infections, particularly fungal keratitis. The obligatory use of niosomal delivery of VRC may reduce the frequency of dosing intervals resulting from its short biological half time and consequently improve patient compliance. METHODS: VRC loaded proniosomes (VRC-PNs) were set by the coacervation technique and completely characterized. The developed formula was comprehensively assessed concerning in- vitro release behavior, kinetic investigation, and its conflict against refrigerated and room temperature conditions. A selected noisomal formula was incorporated into ocusert (VRC-PNs Ocu) formulated by 1% w/w hydroxypropyl methyl cellulose HPMC and 0.1% w/w carbopol 940. Eventually, in vitro antifungal activity against Candida albicans and Aspergillus nidulans was assessed by the cup diffusion method. RESULTS: The optimized VRC-PNs (Pluronic F127: cholesterol weight ratio 1:1 w/w) exhibited the highest entrapment efficiency (87.4±2.55%) with a spherical shape, proper size in nano range and a suitable Zeta potential of 209.7±8.13 nm and -33.5±1.85 mV, respectively. Assurance of drug encapsulation in nanovesicles was accomplished by several means such as attenuated total reflection Fourier-transform infrared spectroscopy, differential scanning calorimetry in addition to powder X-ray diffraction investigations. It displayed a biphasic in vitro release pattern and after 6 months of storage at a refrigerated temperature, the optimized formula preserved its stability. VRC-PNs Ocu proved a very highly significant antifungal activity matched with the free drug or nanosuspension which was extra assured by comparing its mean inhibition zone with that of 5% natamycin market eye drops. CONCLUSION: In conclusion, VRC-PNs Ocu could be considered as a promising stable sustained release topical ocular nanoparticulate system for the management of fungal infections.

Kolliphor® HS 15-cyclodextrin Complex for the Delivery of Voriconazole: Preparation, Characterization, and Antifungal Activity.

BACKGROUND: This study aimed to reduce the amount of sulfobutylether-ß-cyclodextrin (SBECD) used in the marketed voriconazole injections to meet the clinical needs of patients with moderate-to-severe renal impairment (creatinine clearance rate <50 mL/min). OBJECTIVE: This study found that the surfactant Kolliphor® HS 15 (HS 15) and SBECD had significant synergistic effects on solubilizing voriconazole, and a novel voriconazole complex delivery system (VRC-CD/HS 15) was established. METHODS: The complex system was characterized, and its antifungal activity was studied by dynamic light scattering, dialysis bag method, disk diffusion, and broth microdilution. RESULTS: Compared with the control, its encapsulation efficiency (90.07±0.48%), drug loading (7.37±0.25%) and zeta potential (-4.36±1.37 mV) were increased by 1.54%, 41.19%, and 296.36%, respectively; its average particle size (13.92±0.00 nm) was reduced by 15.69%, so the complex system had better stability. Simultaneously, its drug release behavior was similar to that of the control, and it was a first-order kinetic model. Antifungal studies indicated that the complex system had noticeable antifungal effects. With the increase of drug concentration, the inhibition zone increased. The minimum inhibitory concentrations of the complex system against Cryptococcus neoformans, Aspergillus niger and Candida albicans were 0.0313 µg/mL, 1 µg/mL and 128 µg/mL, respectively. CONCLUSION: It showed a significant inhibitory effect on C. neoformans and had a visible therapeutic effect on Kunming mice infected with C. neoformans. Consequently, VRC-CD/HS 15 had better physicochemical properties and still had an apparent antifungal effect, and was promising as a potential alternative drug for clinical application.

Effect of formulation and inhaler parameters on the dispersion of spray freeze dried voriconazole particles.

Spray freeze drying is a particle engineering technique that allows the production of porous particles of low density with excellent aerosol performance for inhalation. There are a number of operating parameters that can be manipulated in order to optimise the powder properties. In this study, a two-fluid nozzle was used to prepare spray freeze dried formulation of voriconazole, a triazole antifungal agent for the treatment of pulmonary aspergillosis. A full factorial design approach was adopted to explore the effects of drug concentration, atomisation gas flow rate and primary drying temperature. The aerosol performance of the spray freeze dried powder was evaluated using the next generation impactor (NGI) operated with different inhaler devices and flow rates. The results showed that the primary drying temperature played an important role in determining the aerosol properties of the powder. In general, the higher the primary drying temperature, the lower the emitted fraction (EF) and the higher the fine particle fraction (FPF). Formulations that contained the highest voriconazole concentration (80% w/w) and prepared at a high primary drying temperature (-10 °C) exhibited the best aerosol performance under different experimental conditions. The high concentration of the hydrophobic voriconazole reduced surface energy and cohesion, hence better powder dispersibility. The powders produced with higher primary drying temperature had a smaller particle size after dispersion and improved aerosol property, possibly due to the faster sublimation rate in the freeze-drying step that led to the formation of less aggregating or more fragile particles. Moreover, Breezhaler®, which has a low intrinsic resistance, was able to generate the best aerosol performance of the spray freeze dried voriconazole powders in terms of FPF.

Improvement of the pharmacokinetic/pharmacodynamic relationship in the treatment of invasive aspergillosis with voriconazole. Reduced drug toxicity through novel rapid release formulations.

Voriconazole (VCZ) is currently the first-line treatment for invasive aspergillosis, although the doses are limited by its poor solubility and high hepatic toxicity. The aim of this study was to develop a solid self-dispersing micellar system of VCZ to improve the pharmacokinetic/pharmacodynamic (PK/PD) relationship and reduce hepatotoxicity. In this work, solid micellar systems of VCZ are formulated with different polysorbate 80 ratios using mannitol as a hydrophilic carrier. The novel micellar systems were characterized by scanning electron microscopy (SEM), powder X-ray diffraction (PXRD), differential scanning calorimetry (DSC) and dissolution studies. Self-dispersing micellar systems reduced VCZ crystallinity, leading to an improvement in its dissolution rate. The in vitro susceptibility test also revealed that the most common microorganisms in invasive aspergillosis exhibited low minimum inhibitory concentration (MIC) values for micellar systems. Pharmacokinetic studies indicated an improvement in bioavailability for MS-1:3:0.05, and changes in its biodistribution to different organs. MS-1:3:0.05 showed an increased concentration in lungs and a significant decrease in VCZ accumulated in the liver.

Stability of frozen 1% voriconazole eye-drops in both glass and innovative containers.

PURPOSE: To assess the physico-chemical stability of Voriconazole Eye-Drops (VED), when stored frozen and refrigerated once thawed, in 3 containers: Amber glass with a Low-Density PolyEthylene (LDPE) eyedropper, and two types of LDPE bottles: one classical and one with an innovative insert that maintains sterility after opening (Novelia® from Nemera). METHODS: Three batches of 1% VED (10 mL) were aseptically compounded from marketed injectable voriconazole (Vfend®) diluted in sterile water for injection. VEDs were stored for three months at -20 °C in amber glass (n = 32), classical LDPE (n = 32) or innovative LDPE (n = 31) bottles. Stability-indicating (HPLC-UV-DAD) and chiral chromatography methods were developed. The stability study was conducted according to GERPAC-SFPC guidelines. At each study time, the following parameters were controlled: visual aspect, voriconazole concentration, pH and osmolality. In addition, non-visible particle count, sterility and absence of racemisation (impurity D - (2S,3R)-voriconazole) were assessed at the beginning and end of the study. Results are expressed as mean ± standard deviation. Statistical analyses were performed using non-parametric tests (α < 5%) to compare containers. RESULTS: When stored frozen, concentration was between 95.2 ±â€¯1.4% and 103.6 ±â€¯1.3% of the initial concentration (C0) with no difference between the three containers (p = 0.564; non-significant). Fifteen days after thawing, concentration was between 97.1 ±â€¯1.6% and 98.6 ±â€¯0.8% of C0 with no difference between containers (p = 0.278 and 0.368 for VED thawed at room temperature and at 2-8 °C, respectively). pH remained stable between each time. Osmolality was slightly higher in glass (533.17 ±â€¯8.93 mOsm/Kg) than in plastic containers (522.17±3.31mOsm/Kg, classical LDPE; 517.5 ±â€¯12.42 mOsm/Kg, innovative LDPE) (p = 0.022). Sterility was preserved. Degradation product areas increased slightly but remained below the limit of quantification. Impurity D was never detected. CONCLUSION: We have demonstrated that the ability of the innovative container Novelia® to maintain VED physicochemical and microbiological stability does not differ from that of amber glass and classical LDPE containers. Real life studies are required to find out if there is a potential difference between Novelia® and other containers in terms of sterility preservation.

Iontophoresis enhances voriconazole antifungal potency and corneal penetration.

Strategies to enhance corneal penetration of voriconazole (VOR) could improve the treatment of fungal keratitis. Here, we evaluated the use of iontophoresis for ocular VOR delivery from either: (i) a cyclodextrin inclusion complex (CD VOR), (ii) a liposome (LP VOR), and (iii) a chitosan-coated liposome (LP VOR CS). LP VOR CS presented mean diameter of 139.2 ±â€¯1.3 nm and zeta potential equal to + 3.3 ±â€¯1.5 mV compared to 134.6 ±â€¯1.7 and -8.2 ±â€¯3.0 mV of LP VOR, which, together with mucin mucoadhesion study, confirmed chitosan-coating. Both drug and liposomal formulations were stable under the influence of an applied electric current. Interestingly, in vitro studies in Candida glabrata culture indicated a decrease in VOR MIC values following iontophoresis (from 0.28 to 0.14 µg/mL). Iontophoresis enhanced drug penetration into the cornea. After 10 min of a 2 mA/cm2 applied current, corneal retained amounts were 45.4 ±â€¯11.2, 30.4 ±â€¯2.1 and 30.6 ±â€¯2.9 µg/cm2 for, respectively, CD VOR, LP VOR, and LP VOR CS. In conclusion, iontophoresis increases drug potency and enhances drug penetration into the cornea, showing potential to be used as "an emergency burst delivery approach".

Voriconazole-Based Salts Are Active against Multidrug-Resistant Human Pathogenic Yeasts.

Voriconazole (VOR) hydrochloride is unequivocally converted into VOR lactates and valinates upon reaction with silver salts of organic acids. This study found that the anticandidal in vitro activity of these compounds was comparable or slightly better than that of VOR. The Candida albicans clinical isolate overexpressing CaCDR1/CaCDR2 genes, highly resistant to VOR, was apparently more susceptible to VOR salts. On the other hand, the susceptibility of another C. albicans clinical isolate (demonstrating multidrug resistance due to the overexpression of CaMDR1) to VOR salts was comparable to that to VOR. Comparative studies on the influence of VOR and its salts on Rhodamine 6G efflux from susceptible and multidrug-resistant C. albicans cells revealed that VOR salts are poorer substrates for the CaCdr1p drug efflux pump than VOR.

Design and evaluation of topical solid dispersion composite of voriconazole for the treatment of ocular keratitis.

Aim: The objective of present investigation was to increases solubility of voriconazole by using solid dispersion techniques and the development of solid dispersion-based voriconazole ophthalmic solutions. Materials & methods: The saturation solubility of solid dispersion containing polyvinylpyrrolidone K90 (PVPK-90) was found to increase the solubility of voriconazole compare other carrier like polyethylene glycol and Polyvinylpyrrolidone K 30 (PVPK-30). Solid dispersion of voriconazole was characterized by saturation solubility, Fourier-transform infrared spectroscopy and Differential scanning calorimetry study. Results & conclusion: The Fourier-transform infrared spectroscopy and Differential scanning calorimetry studies of voriconazole-based solid dispersion confirmed the complete changes in original polymorphic form of voriconazole. The antifungal assay showed that the maximum zone of inhibition was produced from optimized ophthalmic formulation containing sodium alginate as compared with other formulations and marketed eye drops.

Development of a new stability indicating method for the simultaneous separation of voriconazole from its impurities along with sodium benzoate used as a preservative in a powder for oral suspension.

Voriconazole is a second-generation triazole derived from fluconazole, having an enhanced antifungal spectrum, compared with older triazoles. It is the drug of choice for treatment of invasive aspergillosis and many Scedosporium/Pseudallescheria Fusarium infections. Voriconazole is available in both intravenous and oral formulations. Since there is much interest in pharmaceutical quality control, separation of impurities from the main drug substances and accurate assay quantification, and since there is no reference or monograph until nowadays reported for the simultaneous separation of voriconazole from its specified and unspecified impurities along with sodium benzoate used as an antimicrobial preservative, our aim of this work is to develop a new simple, sensitive and stability indicating assay method allowing thus separation by high-performance liquid chromatography. The development of our method consisted in optimizing the following analytical parameters: nature and composition of the mobile phase, its pH, buffer concentration, nature of the stationary phase, column temperature and detection wavelength. After optimisation, separation was achieved on a stainless steel column NOVAPACK C18 (3.9mm×150mm; 4µm particle size) using a gradient mode with methanol, acetonitrile R and an aqueous solution acidified by acetic acid at 1% and adjusted to pH 2.77. The eluted compounds were monitored at 254nm. The flow rate was set at 1.0mL/min, the injection volume at 10µL, and the column oven temperature was maintained at 35°C. Under these conditions, separation was achieved with good resolution and symmetrical peaks' shape. The developed method was validated according to the International Conference on Harmonization (ICH) guidelines, and then it was successfully applied to establish inherent stability of the pharmaceutical formulation subjected to different ICH prescribed stress conditions. The developed method was proved to be simple, specific and precise. Hence, it can be considered as a method for stability study and for routine quality control analysis of voriconazole and sodium benzoate in a powder for oral suspension.

Injectable Schiff base polysaccharide hydrogels for intraocular drug loading and release.

A novel voriconazole (VCZ)-loaded injectable hydrogel was in situ synthetized via a Schiff base reaction between polyaldehyde dextran (PAD) and carboxymethyl chitosan (CMCTS) for intraocular drug loading and release. Water-insoluble VCZ, which is an effective agent in clinic treating fungal endophthalmitis, was loaded through the inclusion into the ß-cyclodextrin (ß-CD) cavity based on host-guest interaction on the linear poly ß-CD chain, which was in situ twined in the cross-linked hydrogel structure. The gelation time, degradation, and drug release process were investigated by studying three kinds of hydrogels with different volume ratio of PAD to CMCTS resolving in phosphate buffered saline (PBS) solution (3:7, 6:7, 9:7), respectively. The property of VCZ-loaded injectable hydrogel should be adjusted through changing the cross-linked density of the hydrogel, the molecular weight or concentration of the linear poly ß-CD to meet the treating requirement, and a multistage drug controlled-release mechanism was proposed. In conclusion, the VCZ-loaded in situ injectable hydrogel should be offered as a promising strategy for intraocular drug delivery in vitreous cavity for the treatment of fungal endophthalmitis. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 107A: 1909-1916, 2019.

Sodium alginate in oil-poloxamer organogels for intravaginal drug delivery: Influence on structural parameters, drug release mechanisms, cytotoxicity and in vitro antifungal activity.

Local administration of antimicrobial agents is the first therapeutic approach for the treatment of Candida albicans infections. The duration of contact of formulations with the vaginal mucosa is critical for therapeutic efficacy. This study describes the development of organogels employing an oil phase composed of oleic acid (OA) and an aqueous phase consisting of the poloxamer PL407, alone or in association with PL188, together with 0.25-1% sodium alginate (SA), in order to obtain an intravaginal drug delivery system capable of modulating the release of voriconazole (VRC). VRC was solubilized in oleic acid homogenized with the PL-SA aqueous phase, at a final concentration of 5 mg/mL. Physicochemical characterization was performed for evaluation of the influence of SA on organogel structural organization, biopharmaceutical properties, pharmacological efficacy, and cytotoxicity, envisaging use of the formulation for the treatment of vaginal candidiasis. The enthalpy variation values showed greater changes in the presence of PL188 and after the incorporation of SA or VRC in the organogels. Rheological analysis showed Tsol-gel values in the ranges 11-39 °C and 27-30 °C for the OA-PL407 and OA-PL407-188 formulations, respectively. Oscillatory analysis of OA-PL407-188 showed that G' was ~20-fold higher than G″, even after submitting the formulation to temperature variation. VRC-OA-PL407 showed fast drug release from 0.5 to 4 h, maintaining total release (~100%) up to 24 h. The incorporation of SA in the organogels enabled modulation of VRC release, with different release percentages for 0.25% SA (~75%), 0.5% SA (~55%), and 1% SA (~35%). The formulation was non-cytotoxic towards HeLa and Vero cell lines. In diffusion tests, it was able to prevent the growth of Candida albicans and Candida krusei. In conclusion, the results suggested that OA-PL407-188-SA organogels could be possible new systems for VRC delivery, with potential for use in future vaginal applications.

Enhanced Aerosolization of High Potency Nanoaggregates of Voriconazole by Dry Powder Inhalation.

Invasive pulmonary aspergillosis is a deadly fungal infection with a high mortality rate, particularly in patients having undergone transplant surgery. Voriconazole, a triazole antifungal pharmaceutical product, is considered as a first-line therapy for invasive pulmonary aspergillosis, and exhibits efficacy even for patients who have failed other antifungal drug therapies. The objective of this study is to develop high potency nanoaggregates of crystalline voriconazole composition for dry powder inhalation using the particle engineering process, thin film freezing. In this study, mannitol at low concentrations acted as a surface texture-modifying agent, and we evaluated the physicochemical and aerodynamic properties of the voriconazole formulations containing different amounts of mannitol. In vitro aerosol performance data demonstrated that powder formulations consisting of 90 to 97% (w/w) voriconazole were the optimum for inhalation with a fine particle fraction (% of delivered dose) as high as 73.6 ± 3.2% and mass median aerodynamic diameter of 3.03 ± 0.17 µm when delivered by a commercially available device. The thin film freezing process enabled phase-separated submicron crystalline mannitol to be oriented such as to modify the surface texture of the crystalline voriconazole nanoaggregates, thus enhancing their aerosolization. Addition of as low as 3% (w/w) mannitol significantly increased the fine particle fraction (% of metered dose) of voriconazole nanoaggregates when compared to compositions without mannitol (40.8% vs 24.6%, respectively). The aerosol performance of the voriconazole nanoaggregates with 5% (w/w) mannitol was maintained for 13 months at 25 °C/60% RH. Therefore, voriconazole nanoaggregates having low amounts of surface texture-modifying mannitol made by thin film freezing are a feasible local treatment option for invasive pulmonary aspergillosis with high aerosolization efficiency and drug loading for dry powder inhalation.

Continuous alternative to freeze drying: Manufacturing of cyclodextrin-based reconstitution powder from aqueous solution using scaled-up electrospinning.

The aims of this study were to evaluate electrospinning as a continuous alternative to freeze drying in the production of a reconstitution injection dosage form, and to prove that aqueous electrospinning can be realized with a high production rate at room temperature. High-speed electrospinning with a novel continuous cyclone collection was used to manufacture a formulation of the poorly water-soluble antifungal voriconazole (VOR) with sulfobutylether-ß-cyclodextrin (SBE-ß-CD). The freeze-dried, marketed product of this drug substance, Vfend® also contains SBE-ß-CD as excipient. SBE-ß-CD acted as a 'quasi-polymer', and it could be electrospun despite its low molecular mass (2163 Da). According to X-ray diffraction and differential scanning calorimetry, no traces of crystalline VOR were detectable in the fibers. Furthermore, Raman mapping and energy dispersive spectroscopy measurements showed a uniform distribution of amorphous VOR in the fibers. Reconstitution tests carried out with ground fibrous powder showed complete dissolution resulting in a clear solution after 30 s (similarly to Vfend®). The high productivity rate (~240 g/h) achieved using high-speed electrospinning makes this scaled-up, continuous and flexible manufacturing process capable of fulfilling the technological and capacity requirements of the pharmaceutical industry. This work shows that aqueous high-speed electrospinning, being a continuous and high-throughput process, is an economically viable production alternative to freeze drying.

Photochemical and Pharmacokinetic Characterization of Orally Administered Chemicals to Evaluate Phototoxic Risk.

This study aimed to verify the applicability of a proposed photosafety screening system based on a reactive oxygen species (ROS) assay and a cassette-dosing pharmacokinetic (PK) study to chemicals with wide structural diversity. The orally taken chemicals, erythromycin, gatifloxacin, 8-methoxypsoralen (MOP), pirfenidone (PFD), trifluoperazine (TFP), and voriconazole (VRZ), were selected as test compounds. The ROS assay was conducted to evaluate their photoreactivity, and all test compounds excluding erythromycin generated significant ROS under simulated sunlight exposure. According to the ROS data, TFP had potent photoreactivity, and the photoreactivity of 4 other compounds was judged to be moderate. Regarding the oral cassette-dosing PK test in rats, the skin deposition of MOP, PFD, and VRZ was relatively high, and gatifloxacin and TFP exhibited moderate skin deposition properties. Based on the ROS and PK data of test compounds, PFD and TFP were judged to be potent phototoxic compounds, and MOP and VRZ were deduced to have phototoxic risk. The predicted phototoxic risk of test compounds by proposed screening was mostly in agreement with observed in vivo phototoxicity in the rat skin. The proposed screening system could provide reliable photosafety information on orally administered compounds with wide structural diversity.